|
Rating: 
List Price: unavailable
Sale Price: $740.00
Availability: Usually ships in 1-2 business days
|
Ready Welders RWII #10000-CS with a Cold Trigger Switch a one year 100% parts and labor limited factory warranty - Product Description
The RWII Model #10000-CS is cabled primarily for battery operation. This model will also connect to all CV (constant voltage) and DC (direct current) output machines. The #10000-CS has been designed at the suggestion of several US Naval officers who liked the Ready Welder very much, but because US Navy ships are all grounded, it could only be used on a Navy Vessel with a built-in Cold Switch.
The ground cable is attached to the red dual quick disconnect connectors. This makes welding jobs in remote locations easy, portable and quick. This model will run off any or all: 18, 24 & 36 volt series depending on the application and material to be welded. When the trigger is released the guns in this model series go cold.
The Model #10000-CS has a One year 100% parts and labor limited factory warranty. And it features the Cold Trigger Switch. With this feature, the Ready Welder, even when connected to a power source, will not light up an arc when the trigger is released. Without this, if the electrode wire is accidentally left protruding from a gun while still connected to a power source, and comes in contact with a metal which happens to be grounded, an arc would be struck, with possible dangerous results. Reportedly U.S. Navy ships are usually grounded, and it has expressed interest in the Model 10000-CS
Features:
*Welds Steel, Stainless and Aluminum or Any Metals Where Standard
*One or Two Pound Spools are Available
*Connects to Batteries
- 18 Volt Battery can do Thin Sheet Metal
- 24 Volt will Single Pass 1/2" @275 amp
- 36 Volt will Weld up to 3/4" @350 to 400 amp
*Welds 22 Gage to 3/4"
*Connects to MIG/Constant Voltage Output Welders
*Uses Wire Sizes from .023 to .045 without Changing Rollers
*Uses Heavy-Duty TWECO Quality Front End Consumables
*Wire Speeds of 50 Inches to 900 Inches per Minute
*Polarity Indicator Lights
*Ten Foot Cable with Quick Disconnects, Can be *Extended to 100 Feet
*Built-in Gas Valve
*Ground Cable Attached
*Built in Cold Switch
Ready Welders RWII #10000-CS with a Cold Trigger Switch a one year 100% parts and labor limited factory warranty - Details
- Welds Steel, Stainless and Aluminum or Any Metals Where Standard
- Uses Wire Sizes from .023 to .045 without Changing Rollers
- Uses Heavy-Duty TWECO Quality Front End Consumables
- Wire Speeds of 50 Inches to 900 Inches per Minute
- Ten Foot Cable with Quick Disconnects, Can be *Extended to 100 Feet
You may also be interested in:
